Installation
To install the DirtWhacker Secondary belt cleaners the following needs to be noted:

CAD Drawings
Make use of the CAD drawing to verify that the DirtWhacker Secondary & Tertiary belt cleaner will fit your present conveyor belt structure.

Dimensions
Dimensioned drawings are provided in Adobe Acrobat PDF format for your convenience, if you do not have access to a CAD package.

Identification
Correctly identify the belt-joints used. The next step will be to recognize any special belt applications. The drawings listed are in the Adobe Acrobat PDF format and they will assist you in correctly positioning the DirtWhacker Secondary and Tertiary Belt Cleaners

Procedure 01
There are two set ways of installing the DirtWhacker Secondary and Tertiary Belt Cleaners. This is the first method.The installation steps laid out here in correct order would assist in making the fitting of the DirtWhacker Secondary and Tertiary Belt Cleaners a success. Please note that the four drawings, identified at the start of the procedure, need to be printed for on-site reference

Procedure 02
There are two set ways of installing the DirtWhacker Secondary and Tertiary Belt Cleaners. This is the second method. The installation steps laid out here in correct order would assist in making the fitting of the DirtWhacker Secondary and Tertiary Belt Cleaners a success. Please note that the drawings, identified at the start of the procedure, need to be printed for on-site reference

Video
These videos provide step-by-step instructions on the correct procedure to install the DirtWhacker Secondary and Tertiary Belt Cleaners