There is one set way of installing the DirtWhacker Angle Plough this is the first method. To install the DirtWhacker Angle Plough unit successfully, please view/print the following installation procedure:

Installation Procedure :

1        Fit one mounting bracket frame as close to the tail pulley as possible

2        Adjust the bracket as far away from the conveyor belt as possible

3        Slide the angle plough on to the shaft of the bracket

4        Move the angle plough to a 45 degree angle across the conveyor belt

5        Adjust the bracket in order for  the shaft of the bracket to slide into the angle plough 

6        Fit the mounting bracket onto the frame

7        Adjust the brackets on both sides in order to allow angle plough to touch the conveyor belt evenly

DirtWhacker Diagonal

. Extremely long service life due to wear-resistant steel buffered blades.

. Belt cleaning system designed for demanding applications.

. Retrofit to all conveyer belt installations.

. Completely fail-safe operation